Portable Radio Accessories
KNB-47
This battery is the smallest battery for the NX-300 portable radio with a capacity of 1950mAh. This battery has a very low profile, making the radio have a very slim feel when using this battery.
KNB-48
This battery is the medium size battery for the NX-300 portable radio with a capacity of 2550mAh. This battery has a medium profile.
KNB-48L
This battery is the large size battery for the NX-300 portable radio with a capacity of 3300mAh. This battery has the largest profile of all the batteries available for the radio. This battery will typically last a 16 hour day or more with significant use.
KSC-32
This battery charger is the standard rapid charger used with the NX-300 and NX-5000 series portable radios. The charger will provide a full charge in about 3 hours and will charge the battery by itself or attached to the radio. The radio should be turned off while in the charger.
EC12M
This battery charger is an after market 12 unit bank rapid charger used with the NX-300 and NX-5000 series portable radios. The charger will provide a full charge in about 3 hours and will charge the battery by itself or attached to the radio. Each radio should be turned off while in the charger. Manufactured by Power Products.
KSC-326
This battery charger is the standard rapid charger used with the NX-300 and NX-5000 series portable radios. The charger will provide a full charge in about 3 hours and will charge the battery by itself or attached to the radio. The radio should be turned off while in the charger.
EC6M-MT18
This battery charger is an after market 6 unit bank rapid charger used with the NX-300 and NX-5000 series portable radios. The charger will provide a full charge in about 3 hours and will charge the battery by itself or attached to the radio. Each radio should be turned off while in the charger. Manufactured by Power Products.
Kenwood Vehicle Charger (Vehicle Charge)
Kenwood Vehicle Charger (Vehicle Charge)
HS1
This single muff headset is a lightweight headset that is designed to be comfortable when worn for a long period of time. The boom microphone is adjustable to obtain clear quality sound and can be set for use of the muff on either the left or the right ear.
HS5
This dual muff headset is a heavyweight headset that is designed to be comfortable when worn for a long period of time. The boom microphone is adjustable to obtain clear quality sound while rejecting background noise. The muff design covers the entire ear to keep outside noise away from the ears.
Listen Only Earpiece
Listen Only Earpiece
AT1W-K1
The AT1W-K1 is a one wire lapel microphone kit. There is one cable attached to the connector to the radio the goes to the microphone and PTT button. From the microphone and PTT button a cable connects to the air-tube earpiece to provide privacy of the receive audio from surrounding people.
Kenwood Two wire headset
The AT2W is a two wire lapel microphone kit. There are two cables attached to the connector to the radio. One cable goes to the microphone and PTT button. The other cable connects to the air-tube earpiece to provide privacy of the receive audio from surrounding people.
AT3W
The AT3W is a three wire lapel microphone kit. There are tree cables attached to the connector to the radio. One cable goes to the microphone. A second cable goes to the PTT button. The third cable connects to the air-tube earpiece to provide privacy of the receive audio from surrounding people.
Kenwood KMC-72 Speaker Mic
The KMC-72 speaker microphone is used by the NX-300, NX-3300 and the NX-5300 portable radio. The speaker-mic is used with portable radios to facilitate communications while the radio is clipped to a pocket or belt. The unit has 2 programmable buttons that can control various radio functions.
KRA-27M
The KRA-27M standard whip antenna will provide full range with the portable radio. The antenna is normally attached to the top of the radio.
KRA-23M
The KRA-23M stubby antenna will provide reduced range with the portable radio but is significantly smaller than the standard whip antenna. The antenna is normally attached to the top of the radio.